top of page

Fire Alarm Life Safety Systems

Electronic Design Solutions offers complete design, engineering, installation, maintenance, service, testing, and monitoring of the most reliable fire alarm systems available. EDS's design engineering team will consult with you and provide assistance for a wide range of needs. EDS will offer you fast bids for your projects. As a result of our expertise in fire alarm systems, we can actually eliminate the need for subcontractors. Our technicians perform their installation duties quickly and efficiently with little or no disruption to patients or staff.

Ask about our 24 hour fire alarm monitoring and yearly testing services for property management companies and building owners.

EDS Inc. provides services to:

  • Health Care Facilities

  • Commercial

    • Small buildings

    • Large buidlings

  • High rise towers

  • Industrial Buildings

  • Schools, etc...

Electronic Design Solutions technicians and support staff are able to provide you with the most efficient and reliable fire life safety installations, monitoring and fire systems testing in the industry.

Potter

potter AFC-1000_edited.png

AFC-1000

  • 127 up to 1,270 Addresses

  • 6 Programmable NACs

  • 10A Power Supply

  • 4 I/O Circuits

  • Listed for Sprinkler Pre-action and Deluge Systems

The AFC-1000 is an expandable analog/addressable releasing fire alarm system with a total system capacity of 1270 addresses. Additional capacity on the system is achieved using multi-point SLC modules The control panel utilizes the exclusive Potter protocol that includes a complete line of sensors and modules. The system is expandable with a total of nine additional addressable Signaling Line Circuits (SLC) each with a maximum of 127 devices. Each SLC may be comprised of any combination of smoke sensor, heat detectors or modules and allows for a total of 50 ohms of impedance and may use any wire compliant with the National Electrical Code (NEC).
The NACs may be expanded using the PSN-1000 series intelligent power supplies. Each PSN-1000 adds another 10 Amps of power, 2 additional input circuits and the AFC-1000 will support up to 31 power supplies. The system will synchronize the strobes system wide. In addition, the PSN-1000E has space to allow the installation of up to six PAD100-SLCE SLC loop expansion cards. The cards mount on a stacker bracket that allows access to all SLC circuit

Potter

potter AFC-100_edited.png

AFC-100

  • 100 Addresses

  • 2 Programmable NACs

  • 5A Power Supply

  • 2 I/O Circuits

  • Listed for Sprinkler Pre-action and Deluge Systems

The AFC-100 is an analog/addressable releasing fire alarm system with a total system capacity of 100 addresses. Additional capacity on the system is achieved using multi-point SLC modules. The control panel utilizes the exclusive Potter protocol that includes a complete line of sensors and modules. Each SLC may be comprised of any combination of smoke sensor, heat detectors or modules and allows for a total of 50 ohms of impedance and may use any wire compliant with the National Electrical Code (NEC)

.The NACs may be expanded using the PSN-1000 series intelligent power supplies. Each PSN-1000 adds another 10 Amps of power, 2 additional input circuits and the AFC-100 will support up to 31 power supplies. The system will synchronize the strobes system wide. In addition, the PSN-1000E has space to allow the installation of up to six loop expansion cards. The cards mount on a stacker bracket that allows access to all SLC circuit connections.

Potter

potter ARC-100_edited.png

ARC-100

  • 100 Addresses

  • 2 Programmable NACs

  • 5A Power Supply

  • 2 I/O Circuits

  • Listed for Clean Agent Releasing Systems

  • The ARC-100 is an analog/addressable releasing fire alarm system with a total system capacity of 100 addresses. Additional capacity on the system is achieved using multi-point SLC modules. The control panel utilizes the exclusive Potter protocol that includes a complete line of sensors and modules. Each SLC may be comprised of any combination of smoke sensor, heat detectors or modules and allows for a total of 50 ohms of impedance and may use any wire compliant with the National Electrical Code (NEC).

  • The ARC-100 is listed for releasing of fire suppression systems. The software allows cross zones, counting zones, and timers for suppression. The system is capable of multiple release outputs across multiple hazards. In addition, the PSN-1000 may be used to extend releasing capability. The NACs may be expanded using the PSN-1000 series intelligent power supplies. Each PSN-1000 adds another 10 Amps of power, 2 additional input circuits and the ARC-100 will support up to 31 power supplies. The system will synchronize the strobes system wide. In addition, the PSN-1000E has space to allow the installation of up to six loop expansion cards.The cards mount on a stacker bracket that allows access to all SLC circuit connections.

Potter

potter corroded-sprinkler-head.jpg

Corrosive oxygen in your wet system

It may not seem possible that a new sprinkler system can produce pinhole leaks in less than two years, but it is. The corrosive effects of oxygen trapped in your wet system could be more costly than you think. 

Because nitrogen is an inert gas, it does not react with the metal in a fire sprinkler system. Even in the presence of water, no oxidation or rust will occur.

Nitrogen for Wet Systems

Using Nitrogen for corrosion control is a well established practice for dry and pre-action systems. Taking the same concept of purging out the oxygen, replacing it with nitrogen, and applying it to wet systems leads to similarly great results. Simply pre-filling the wet sprinkler system with high purity nitrogen changes the air pockets to nitrogen pockets.

Napco

napco StarLink-FIRE-DualPaddle-sm.png

  • Works on any panel - Universal full event sole & dual path cellular &/or IP alarm reporting from any panel brand, virtually anywhere

  • Upgrade Accounts' Alarm Reporting to latest LTE networks, either AT&T or Verizon, for maximum cellular longevity and reliability nationwide, with unique dual diversity twin antennae design and Signal Boost™ circuitry

  • Easiest, fastest installation in under 10-minutes. Easy activation with auto-dialer capture; Panel-Powered Technology™ (powered by the panel)

  • Still "Free for All™" applications, with professional trade-up, from old radios, old networks, POTS or even on new construction (see details)

  • Dependable, full data reporting to any Central Station nationwide, field-proven reliable, over 5-Million Times/Day (5,000,000+ StarLink alarm and supervisory signals are sent through the UL Napco Network Operations Center every 24 hours)

  • Communicate alarm reports on LTE (Long Term Evolution) for 10+ year cellular life, Connected on Verizon's CAT1 extensively-deployed, cyber-protected multi-billion dollar network

  • Remote On/Off Consumer App

  • Over-the-Air (OTA) Upgradeable Communicator

  • Full high-speed control panel upload/download supported on Gemini™ (Requires cable; #SLE-DLCBL)

Restaurant

Kitchen Suppression Systems

hochiki Avenger-Flex.jpg

Avenger K Restaurant Fire Suppression System Avenger offers two systems to meet the industry’s varying needs. With the Avenger K Restaurant Fire Suppression System you get appliance-specific coverage that typically offers lower initial cost.

 

The AK system is ideal for uses where appliance location is fixed such as in fast food chains, casual dining, cruise ships and school cafeterias. Avenger Flex Restaurant Fire Suppression System The Avenger Flex Restaurant Fire Suppression System adds greater flexibility by letting you reconfigure a kitchen or move appliances without moving nozzles. Because of its adaptability, this system is the most cost effective choice over the life of the system. The AF system was designed with fine dining, culinary

bottom of page